Article Marketing

So lately, I’ve been getting a few messages about a new Travel-based Network Marketing company called Plannet Marketing. And chances are if you’re reading this, you’re probably thinking about joining and you’re doing some last minute research on the company. If that’s the case, then look no further. In this Plannet Marketing Review, I’ll cover all the essential details you’ll need before you join. With that said, I do want to disclose that I am not a Plannet Marketing distributor. In all honesty, it really doesn’t matter to me one way or the other if you join so you know you’ll be getting a truly unbiased review.

Who Is Plannet Marketing?

Plannet Marketing is a company that sells travel through a Network Marketing business model. The company is based out of Atlanta, Georgia and as of this writing Plannet Marketing is just over 6 months old. The company was founded by Donald Bradley, formerly of YTB and Paycation Travel. Bradley brings with him 20 years of experience in Network Marketing. Before starting Plannet Marketing, Bradley was the Master Distributor and #1 Income Earner in Paycation Travel. He literally had everyone in Paycation in his downline and was responsible for bringing in the company’s top leadership group. I’m not sure what happened, but around the time Craig Jerabeck and Barry Donalson left 5linx and joined Paycation was the same time Bradley decided to leave. Maybe he didn’t feel good about those guys joining and being sponsored by the company when he was the Master Distributor. Who knows? And who really cares? Regardless of the reason, it looks like Bradley was willing to walk away from everything he built to start from scratch again. Overall, the company looks pretty solid. And while it’s too early to tell if they’ll even be around for the long haul because they’re only a few months old, Bradley and the other members of the Corporate team bring a ton of experience in Network Marketing and Travel, which is a good thing.

How Do You Make Money With Plannet Marketing?

The actual compensation plan provides several ways for distributors to get paid. But the crown jewel of the compensation plan is the 3X9 Matrix. With a Matrix model, it’s critical that you get a spot early on if you want to capitalize on spillover. If you’re positioned underneath a strong builder, you can benefit from their efforts as they place people under you while they’re filling up their Matrix. With a fully filled 3X9 Matrix, you’ll have 29,523 distributors underneath you. If they’re all active and you get $4 monthly from each distributor, you can make up to $118,092 monthly. In addition to your Matrix pay, you can also earn a 10% Match on the Matrix pay of your personally sponsored distributors.

In addition to the Matrix, the company provides monthly bonuses to Directors. Here’s a simple breakdown of how the Director bonuses work:

1 Star Director – 100 active distributors – $500/month

2 Star Director – 300 active distributors – $1,000/month

3 Star Director – 500 active distributors – $2,000/month

4 Star Director – 1,500 active distributors – $5,000/month

5 Star Director – 4,000 active distributors – $10,000/month

6 Star Director – 10,000 active distributors – $16,000/month

7 Star Director – 25,000 active distributors – $30,000/month

8 Star Director – 50,000 active distributors – $50,000/month

9 Star Director – 100,000 active distributors – $100,000/month

Between the Matrix Pay, the 10% Match on your personals and the Director Bonuses, it’s pretty clear that there’s plenty of money on the back end. If you’re a strong team builder and you have a knack for creating good culture, Plannet Marketing might be a very lucrative opportunity for you.

Should You Join Plannet Marketing?

Well, only you can truly answer that. The company certainly looks solid. Travel is a very marketable service that’s easy to talk about. And the compensation plan is generous and lucrative. All those things together should guarantee success, right? Unfortunately, nothing could be further from the truth. At the end of the day, it is your ability to sponsor people into your business on a consistent basis that will lead to your success. This is why I recommend that you learn Attraction Marketing. If you can position yourself in front of prospects that are already looking for what you’re offering, you’ll have no problem getting leads online. And if you have an abundance of quality leads, there’s no telling how successful you can be.

 

People often ask us the same question: “What’s the best way to advertise my Home Improvement business and gather leads?” We’ve compiled a handy list of the 10 most useful tools to advertise your business and see results.

1. Build a Good Online Presence

For what may seem like an obvious necessity for most, some companies still don’t value the importance of a good website. While most companies do have an online presence, it may not be attractive or user-experience optimized. A good website should convey the businesses’ goals, experience, qualities, and services in an easy to read way. There should be a blatant call to action, and sufficient information for the viewer. If the potential client can glance at your page and get all the important information needed, you are that much closer to reeling them in.

 

2. Search Engine Optimization

Many people think that SEO is solely related to building links and advertising your website link. A large part of search engine optimization is related to the way your page is set up. Are you taking advantage of meta keywords and titles? Are you using headers properly? Does your site have a large amount of unique content optimized for targeting certain keywords? These are all important things to consider.

3. Craigslist

Craigslist is a great way to advertise your services. You can hire a designer to create a small ad for you to embed into your Craigslist post, or simply use HTML to format a nice, easy to read, eye-catching advertisement. Re-post as per Craigslist’s guidelines and keep your business’s name out there.

4. Adwords

Google provides a great PPC (pay-per-click) advertising system which will target related websites that use Google Adsense to display your ads. You can target your chosen demographic, choose how much you’d like to pay for every click, and modify the appearance of your ad. They offer text ads, image ads, and rich media ads (flash, animation).

5. Social Media

These days social media is becoming the leading the way for advertising and creating a “friendly” relationship with your clients and fans. Create a Fan page on Facebook, establish a Twitter account, or create a blog. these are all great methods to attract your customers.

6. Blog Commenting

Find blogs related to your industry. Search them out, and post meaningful, relevant comments in the comments section. Be sure to add a link to your website, with a keyword that you’d like to target in the search engines. Slow and steady is the key to seeing results; keep at it on a daily/weekly basis and in due time you’ll see results.

7. Local Advertising

If your business is based locally, an ad in a local magazine or newspaper is a great option. Some companies provide direct mail advertising, which allows you to localize your advertisement in a demographic of your choice.

8. Content is King

Creating and publishing unique content will provide your website visitors with an interesting read, a potential link-back, and will improve your chances at getting picked up by the search engines. Google is beginning to heavily penalize websites with unoriginal content, and content of poor quality. Don’t get cut by the search engines. Keep your content interesting, unique, and greatness will follow.

9. Word of Mouth

Sometimes in these technological days we forget the importance of word of mouth! Don’t ever underestimate the power of a good recommendation. Treat your customers with respect and handle their job with excellence and you just might get the good word passed on.

10. Physical Ads

Physical advertisements such as billboards, bus benches, and other sign-age are often expensive, but they are generally high-profile and attention-getting. If you have the marketing funds available, give it a shot and see how it works. Create a marketing campaign and if the results are lower than you expected or needed, try another route.

While there are many methods that businesses use to market themselves, these are the top 10 ways to achieve positive results in this ever-advancing technological age. Try these steps for yourself and watch your business rise to success!

Reminiscing about the good old days when we were growing up is a memory trip well worth taking, when trying to understand the issues facing the children of today. A mere 20 years ago, children used to play outside all day, riding bikes, playing sports and building forts. Masters of imaginary games, children of the past created their own form of play that didn’t require costly equipment or parental supervision. Children of the past moved… a lot, and their sensory world was nature based and simple. In the past, family time was often spent doing chores, and children had expectations to meet on a daily basis. The dining room table was a central place where families came together to eat and talk about their day, and after dinner became the center for baking, crafts and homework.

Today’s families are different. Technology’s impact on the 21st century family is fracturing its very foundation, and causing a disintegration of core values that long ago were what held families together. Juggling work, home and community lives, parents now rely heavily on communication, information and transportation technology to make their lives faster and more efficient. Entertainment technology (TV, internet, videogames, iPods) has advanced so rapidly, that families have scarcely noticed the significant impact and changes to their family structure and lifestyles. A 2010 Kaiser Foundation study showed that elementary aged children use on average 8 hours per day of entertainment technology, 75% of these children have TV’s in their bedrooms, and 50% of North American homes have the TV on all day. Add emails, cell phones, internet surfing, and chat lines, and we begin to see the pervasive aspects of technology on our home lives and family milieu. Gone is dining room table conversation, replaced by the “big screen” and take out. Children now rely on technology for the majority of their play, grossly limiting challenges to their creativity and imaginations, as well as limiting necessary challenges to their bodies to achieve optimal sensory and motor development. Sedentary bodies bombarded with chaotic sensory stimulation, are resulting in delays in attaining child developmental milestones, with subsequent impact on basic foundation skills for achieving literacy. Hard wired for high speed, today’s young are entering school struggling with self regulation and attention skills necessary for learning, eventually becoming significant behavior management problems for teachers in the classroom.

So what is the impact of technology on the developing child? Children’s developing sensory and motor systems have biologically not evolved to accommodate this sedentary, yet frenzied and chaotic nature of today’s technology. The impact of rapidly advancing technology on the developing child has seen an increase of physical, psychological and behavior disorders that the health and education systems are just beginning to detect, much less understand. Child obesity and diabetes are now national epidemics in both Canada and the US. Diagnoses of ADHD, autism, coordination disorder, sensory processing disorder, anxiety, depression, and sleep disorders can be causally linked to technology overuse, and are increasing at an alarming rate. An urgent closer look at the critical factors for meeting developmental milestones, and the subsequent impact of technology on those factors, would assist parents, teachers and health professionals to better understand the complexities of this issue, and help create effective strategies to reduce technology use. The three critical factors for healthy physical and psychological child development are movement, touch and connection to other humans. Movement, touch and connection are forms of essential sensory input that are integral for the eventual development of a child’s motor and attachment systems. When movement, touch and connection are deprived, devastating consequences occur.

Young children require 3-4 hours per day of active rough and tumble play to achieve adequate sensory stimulation to their vestibular, proprioceptive and tactile systems for normal development. The critical period for attachment development is 0-7 months, where the infant-parent bond is best facilitated by close contact with the primary parent, and lots of eye contact. These types of sensory inputs ensure normal development of posture, bilateral coordination, optimal arousal states and self regulation necessary for achieving foundation skills for eventual school entry. Infants with low tone, toddlers failing to reach motor milestones, and children who are unable to pay attention or achieve basic foundation skills for literacy, are frequent visitors to pediatric physiotherapy and occupational therapy clinics. The use of safety restraint devices such as infant bucket seats and toddler carrying packs and strollers, have further limited movement, touch and connection, as have TV and videogame overuse. Many of today’s parents perceive outdoor play is ‘unsafe’, further limiting essential developmental components usually attained in outdoor rough and tumble play. Dr. Ashley Montagu, who has extensively studied the developing tactile sensory system, reports that when infants are deprived of human connection and touch, they fail to thrive and many eventually die. Dr. Montagu states that touch deprived infants develop into toddlers who exhibit excessive agitation and anxiety, and may become depressed by early childhood.

As children are connecting more and more to technology, society is seeing a disconnect from themselves, others and nature. As little children develop and form their identities, they often are incapable of discerning whether they are the “killing machine” seen on TV and in videogames, or just a shy and lonely little kid in need of a friend. TV and videogame addiction is causing an irreversible worldwide epidemic of mental and physical health disorders, yet we all find excuses to continue. Where 100 years ago we needed to move to survive, we are now under the assumption we need technology to survive. The catch is that technology is killing what we love the most…connection with other human beings. The critical period for attachment formation is 0 – 7 months of age. Attachment or connection is the formation of a primary bond between the developing infant and parent, and is integral to that developing child’s sense of security and safety. Healthy attachment formation results in a happy and calm child. Disruption or neglect of primary attachment results in an anxious and agitated child. Family over use of technology is gravely affecting not only early attachment formation, but also impacting negatively on child psychological and behavioral health.

Further analysis of the impact of technology on the developing child indicates that while the vestibular, proprioceptive, tactile and attachment systems are under stimulated, the visual and auditory sensory systems are in “overload”. This sensory imbalance creates huge problems in overall neurological development, as the brain’s anatomy, chemistry and pathways become permanently altered and impaired. Young children who are exposed to violence through TV and videogames are in a high state of adrenalin and stress, as the body does not know that what they are watching is not real. Children who overuse technology report persistent body sensations of overall “shaking”, increased breathing and heart rate, and a general state of “unease”. This can best be described as a persistent hypervigalent sensory system, still “on alert” for the oncoming assault from videogame characters. While the long term effects of this chronic state of stress in the developing child are unknown, we do know that chronic stress in adults results in a weakened immune system and a variety of serious diseases and disorders. Prolonged visual fixation on a fixed distance, two dimensional screen grossly limits ocular development necessary for eventual printing and reading. Consider the difference between visual location on a variety of different shaped and sized objects in the near and far distance (such as practiced in outdoor play), as opposed to looking at a fixed distance glowing screen. This rapid intensity, frequency and duration of visual and auditory stimulation results in a “hard wiring” of the child’s sensory system for high speed, with subsequent devastating effects on a child’s ability to imagine, attend and focus on academic tasks. Dr. Dimitri Christakis found that each hour of TV watched daily between the ages of 0 and 7 years equated to a 10% increase in attention problems by age seven years.

In 2001 the American Academy of Pediatrics issued a policy statement recommending that children less than two years of age should not use any technology, yet toddlers 0 to 2 years of age average 2.2 hours of TV per day. The Academy further recommended that children older than two should restrict usage to one hour per day if they have any physical, psychological or behavioral problems, and two hours per day maximum if they don’t, yet parents of elementary children are allowing 8 hours per day. France has gone so far as to eliminate all “baby TV” due to the detrimental effects on child development. How can parents continue to live in a world where they know what is bad for their children, yet do nothing to help them? It appears that today’s families have been pulled into the “Virtual Reality Dream”, where everyone believes that life is something that requires an escape. The immediate gratification received from ongoing use of TV, videogame and internet technology, has replaced the desire for human connection.

It’s important to come together as parents, teachers and therapists to help society “wake up” and see the devastating effects technology is having not only on our child’s physical, psychological and behavioral health, but also on their ability to learn and sustain personal and family relationships. While technology is a train that will continually move forward, knowledge regarding its detrimental effects, and action taken toward balancing the use of technology with exercise and family time, will work toward sustaining our children, as well as saving our world. While no one can argue the benefits of advanced technology in today’s world, connection to these devices may have resulted in a disconnection from what society should value most, children. Rather than hugging, playing, rough housing, and conversing with children, parents are increasingly resorting to providing their children with more videogames, TV’s in the car, and the latest iPods and cell phone devices, creating a deep and widening chasm between parent and child.

Cris Rowan, pediatric occupational therapist and child development expert has developed a concept termed ‘Balanced Technology Management’ (BTM) where parents manage balance between activities children need for growth and success with technology use. Rowan’s company Zone’in Programs Inc. http://www.zonein.ca has developed a ‘System of Solutions’ for addressing technology overuse in children through the creation of Zone’in Products, Workshops, Training and Consultation services.

Filipino music and art have both been influenced by the cultures that have migrated to this nation. The first type of music that developed in the Philippines was indigenous music brought here by native tribes that migrated from Taiwan. There are three basic groups of indigenous music styles: southern styles, northern styles and other styles. The southern style of music usually involves five different instruments including the kulintang, the agung, the gangdinagan, the dabakan and the babedil. The northern styles of indigenous music reflect Asian gong music. Their music usually features the unbossed gong called the Gangsa. In addition to the instruments used by southern and northern music styles, other instruments used in the Philippines include log drums, flutes, bamboo zithers and the Kudyapi.

Hispanic cultures from Spain and Mexico have greatly influenced the development of Filipino music. These cultures have introduced musical forms like the Harana the Kundiman and Rondalla. Most of these music forms developed as a result of the fusion between tribal music styles and traditional Spanish and Mexican music. Today the influence of Spain and Mexico is still present in modern Filipino music. Modern popular music in the Philippines still has a Hispanic flavor.

Filipino Art has its roots in indigenous traditions and colonial imports. Like most cultures, the Philippines have their own style of plastic arts like sculpture and painting. However, they also have their own style of movement arts like dancing. Some of the most notable artists from the Philippines include Fernando Amorsolo, David Cortes Medalla, Nunelucio Alvardao, Juan Luna, Felix Hidalgo and Rey Paz Contreras.

A recent survey conducted by this writer on the Internet for a quick, snap shot sense of the subject matter, immediately revealed that there’s a state of relatively scanty knowledge of, or information about, this particular refined petroleum product called the AGO, among international oil dealers and suppliers. In deed, in one rather remarkable instance involving a popular ‘Ask for Answers’ online discussion portal, one reader expressly posited the question, soliciting information from the readers as to what is/was ‘the meaning’ of the petroleum term AGO, among three other refined petroleum products, which he went on to list – DPK, PMS, JET A1. There was just one response – a response that has stood the same for 5 years since. Oddly enough, however, of the 4 oil products that the answerer named, the answerer was exactly accurate in the definition he proffered on three of those. But, on ONLY one of them, the AGO product, the answer given by the answerer was somewhat slightly off, as he gave the definition of the product as meaning ‘Automotive Gas & Oils.’

So, first, we start with this basic question: What is AGO Oil Product, or the Automotive Gas Oil?

What the AGO Oil Product Is

The term AGO, which specifically stands for the Automotive Gas Oil, is the name given to the fuel type that’s used by road vehicles (cars, trucks, buses, vans, and the like) that are powered by DIESEL engines. That is, in a word, it is the diesel vehicle engine fuel. In terms of how the fuel gets to be produced or manufactured, the fuel is the type that, in the distillation and processing of crude oil work, is obtained in the mid-boiling range of that process. Related fuels which are used for non-road applications including off-road diesel engines, such as the Industrial Gas Oils (IGOs), are obtained from the same ‘fraction’ of the crude oil barrel.

Technically speaking, the term Automotive Gas Oil (AGO) is the technical name used by the oil industry in describing this particular fuel. However, in terms of the ordinary consumers in the market, the term ‘automotive diesel fuel,’ or just plain ‘diesel,’ is the more commonly used and more widespread name that the ordinary consumer uses in describing this fuel. Petroleum products are usually grouped into THREE categories: the ‘light distillates’ (LPG, gasoline, naphtha), the ‘middle’ distillates (kerosene, diesel), and the ‘heavy’ distillates and residuum (heavy fuel oil, lubricating oils, wax, asphalt). This classification is based primarily on the way crude oil is distilled and separated into fractions (called distillates and residuum). Within the oil industry, the generic oil industry name that’s used to describe gasoils – which include both AGO and IGO – fall under the ‘Middle Distillates’ category, meaning those kinds of refined oil products whose ‘boiling range’ fall in the MIDDLE, that is, between those whose range fall in the higher levels or in the lower levels. (See the Chart below). As you can readily see in the Chart below, at a Boiling Range of between 520 to 650, the AGO falls right in the middle range of most categories of the refined oil products.

The Market & Primary Uses of the AGO oil Product Among Its Customers

AGO is used in two main types of vehicles: 1) the heavy-duty vehicles, such as trucks and buses, and 2) the light-duty vehicles, such as vans and passenger cars. In most countries, including the USA as well as the developing countries, the heavy-duty vehicles make up the bulk of the market for AGO. In a country such as Japan, there is a significant light-duty vehicle sector, but it is in Europe that the demand for AGO from this sector is highest, with more than one-third coming from the passenger cars and other light vehicles. Customer requirements between the two types of fuel usage differ to some extent. Diesel engines are widely used in heavy-duty vehicles. Such vehicles are frequently operated in fleets and are re-fuelled centrally with the fuel delivered directly from the supplier. In the light-duty vehicle sector, recent advances in engine design now also allow light-duty diesel engines to compete with gasoline engines in terms of the performance standards. Light-duty vehicles are generally re-fuelled through retail outlets. In any case, whether it is in the light-duty sector or in the heavy-duty sector, in both sectors the customer will generally be looking for the fuel that provides economy, power, reliability and environmental acceptability.

Use As Car Fuel

Diesel-powered vehicles, such as AGO-powered vehicles, generally have a better fuel economy than equivalent gasoline engines and produce less greenhouse gas emission. Their greater economy is due to the higher energy per-liter content of diesel fuel and the intrinsic efficiency of the diesel engine. True, petrodiesel’s higher density results in higher greenhouse gas emissions per liter compared to gasoline. However, the modern diesel-engine automobiles have a 20-40% better fuel economy, and this well offsets the higher per-liter emissions of greenhouse gases, while a diesel-powered vehicle emits 10-20 percent less greenhouse gas than comparable gasoline vehicles. Biodiesel-powered diesel engines offer substantially improved emission reductions compared to petrodiesel or gasoline-powered engines, while retaining most of the fuel economy advantages over conventional gasoline-powered automobiles.

How Crude Oil Fractions Are Processed Into Refined Oil Products, Including AGO and Other Products

How do we get to have refined petroleum products, of which a product like AGO is one? Put simply, it is out of the refinery processing (i.e., out of the ‘refining’) of crude oil that many other usable products – products that we generally refer to as refined or finished petroleum products – are produced. Meaning products such as gasoil, gasoline, kerosene, AGO, etc. The process of oil ‘refining’ or processing is a very complex one, and involves both chemical reactions and physical separations. The substance that’s called Crude Oil is composed of thousands of different ‘molecules,’ and according to chemical engineers and molecular experts, it would be nearly impossible to isolate every molecule that exists in crude oil and thereby make finished products from each molecule.

Consequently, the way chemists and engineers deal with this problem, is simply by them isolating the mixtures (also called ‘fractions’) of molecules according to what is known as the mixture’s “boiling point range.” For example, molecules for the gasoline product might boil within the ‘range’ of from 90 to 400 oF. While the range at which the home heating oil product’s molecular mixes could boil might be from 500 to 650 oF, and so on. For purposes of convenience and simplification, each mixture or fraction is assigned a specific name to identify it.

The following chart illustrates the ‘boiling range’ and name of the petroleum fractions.

Fraction

Boiling Range,oF.

Butanes and lighter

<90

Light straight run gasoline (LSR)

or light naphtha (LN)

90-190

Naphtha or heavy naphtha (HN)

190-380

Kerosene

380-520

Distillate or atmospheric gas oil (AGO)

520-650

Residua

650 +

Vacuum gas oil (VGO)

650-1000

Vacuum Residua

1000 +

In sum, refined products are products that are produced by isolating the mixtures or fractions of molecules that come from the raw crude oil, and combining them, along with those from various refinery processing units. These fractions are ‘blended’ or mixed to satisfy specific properties that are important in allowing the refined product to perform in accordance with the specifications or requirements that are designed by or in an engine, in terms of ease in handling, reducing the undesirable emissions produced when the product is burned, etc

FINDING OR OBTAINING A SUPPLY OF THE AGO

Simply stated, the KEY term and task here is finding an authentic AGO oil product supply or supplier. Or an AGO buyer, as the case may be. Why? This is simply because, today, in the international refined oil products trading market, specially in the so-called “secondary” market, probably the single most fundamental and most difficult common problem which legitimate dealers who seek to find reliable suppliers have, is often NOT so much finding a party who will claim heaven and earth that he/she has the AGO oil product to sell and can supply you the product. Or that he can buy one from you, as the case may be. BUT finding such a party who is actually AUTHENTIC & LEGITIMATE, and can actually DELIVER on the product.

MOST PEOPLE WHO SAY THEY’RE SUPPLIERS OF PRODUCT PROVIDE NO VERIFIED OR VERIFIABLE PROOFS OR SOURCES

A well-established reality and a given today, is that in world oil deals involving trading in the crude oil and refined petroleum products, specially in the so-called international “secondary” market, probably the single most fundamental and most difficult common problem which legitimate buyers frequently confront today, is the problem of the genuineness and authenticity of the supplier of product and his ability to deliver on the sales offer he presents. Refined petroleum products, such as AGO, D2, Mazut, Jet fuel, etc., are certainly not immune or exempt from such endemic problem that seems to plague the entire secondary market oil trade industry, but rather are, in deed, right in the middle of it.

It’s a problem whose central source can simply be summed up in one word – namely, that not unlike most persons or entities who claim via the Internet to be oil or petroleum products suppliers or “sellers,” most who claim to be suppliers of AGO, as well (or of similar refined oil products, such as the diesel gasoil or Russian D2, Mazut, Jet fuels, and the like), either provide NO proofs or evidence at all of that, or provide proofs or evidence that are often absolutely meaningless because they’re unverified and unverifiable. That is, for the serious or credible Internet petroleum buyer involved in the world oil deals and seriously intent on finding duly verifiable authentic AGO oil product supply or supplier, there are generally just NO such supply or suppliers of the product in the so-called “secondary” market.

Most such serious or genuine AGO buyers (or suppliers, as well, as the case may be) seeking to find equally genuine AGO suppliers (or sellers seeking buyers, when applicable) in the international secondary market, find that the problem is particularly acute and compounded by the fact that almost all “sellers” (or suppliers), or their brokers or intermediaries, that one meets on the Internet, are essentially unknown, unestablished dealers who lack any name, reputation or identity, or any known location on the planet, and lack any record or history of past performance in doing the business. In consequence, a serious AGO buyer, for example, is often being asked – and actually being realistically expected – to, in effect, merely take “the word” of some dubious, anonymous, unidentified and apparently unidentifiable, phantom “seller” or “supplier” for it, with no credible supporting evidence provided, and no verification or authentication whatsoever of the Internet seller’s offer or claims.

In sum, he’s being asked – and actually being expected – to risk, or, rather, to gamble away, his hard-earned mini-fortune of some hundreds of millions of dollars merely on such a “word.”! This, it should be added, is being expected of the buyer in a business environment and climate that is patently awash in fraud and a network of notorious scammers worldwide!

WHERE TO BUY AGO OIL PRODUCT, HOW DO YOU FIND THE SUPPLIERS?

Clearly, then, if you are a real buyer of product seriously intent on finding authentic diesel AGO oil product supply or suppliers (or those of any similar refined oil products, such as the diesel gasoil or Russian D2, Mazut, Jet fuels, and the like) – meaning one that is duly verified and verifiable – probably the most critical, vital, even life-or-death task for you, is that you had better be sure to develop, in some way or manner, a skilled and effective strategy for finding, vetting, selecting out and authenticated suppliers that can provide you reliable steady supply of the product, and which will be scam-free, assured, and long-lasting.

How?

Quite oddly enough, the answer to that question is actually not that complicated or complex. For our limited purposes here, suffice it simply to just say, that there is, in fact, such a methodology, tool and strategy for doing just that long in practical use in the industry. Long in practical use by knowledgeable, experienced and trained eyes and experts, and the successful traders, in the business. If you are, yourself, in fact a provable legitimate trader or authentic practitioner of the petroleum trade (assuming you are actually one) operating in the secondary market, and are truly serious about finding and securing authentic and reliable AGO oil product supply or supplier, or about finding and securing a buyer of equivalent caliber for the product, as the case may be, that’s actually readily within your reach. There’s just really one crucial proviso, only – namely, PROVIDING that you’re equipped with the requisite knowledge, skill, training, tool, methodology and practical experience, by which to undertake the whole process of doing so.

To be sure, true, in today’s world oil deals of the international secondary market, including sourcing for AGO product, which is largely an Internet-dominated world, and is for the most part prevalently awash in fake dealers and scammers, finding duly verified authentic petroleum or automotive gas oil product supply, suppliers and sellers of such caliber (or buyers, just as well), is not ordinary or commonplace. Nor is it at all an easy task to attain. It is, however, by no means impracticable, nor are such suppliers non-existent. Far, far from it! Quite to the contrary, such suppliers abound. It’s only that you just have to search around for such suppliers (or the legitimate buyers, as well, as the case may be) more diligently and skillfully and in the right places from the right sources, and know precisely how and where. That requires, unavoidably, supreme industry knowledge, skills set, training, know-how, connections, precious time expenditure, and experience.

FOR A FOLLOW UP

YOU WANT TO FOLLOW UP ON HOW TO FIND AUTHENTIC AGO OIL PRODUCT SUPPLY OR SUPPLIERS, OR EVEN BUYERS, THAT ARE ALREADY VERIFIED, CONFIRMED AND VERIFIABLE AND SCAM-FREE? Please see the link provided in the author’s Resource Box below.

What is a skater? A skater is anyone that loves the feeling of freedom they get when skating. Skaters come in all ages with all types of personalities. It can be the boy next door or the punk rocker down the street. It can be the nerd that never leaves his computer except for skating or the group of Goth kids that live in town.

Skaters love the feeling they get when they do an incredible jump perfect every time. They love the thrill of pushing themselves beyond their limits and climbing new heights and reaching new goals.

What types of skaters are there?

There are several different types of skaters and each type requires different equipment. The most common type of skater is the roller skater. This group includes kids and adults of all ages. Usually this type of skating is done at a skating rink and they either wear roller skates or inline skates. You can also purchase outdoor skates that you can wear anywhere.

Another popular type of skater is the ice skater. Ice skating is done by many just for fun in ice rinks located all over the world. However, it is also many professional ice skaters that perform in competitions for metals. Some of these have become quite famous. The performance that a figure skater provides is amazing and takes years of practice and patients. These skaters are to be greatly admired.

Skateboarders are another type of skater that has grown in popularity over the years. Skateboarders make up a unique group of people that love to have fun and spend time together. This type of skating requires skill and a desire for excitement.

Are there stereotypes about skaters?

The answer is yes. Unfortunately, there are many people that have the wrong idea about the skater lifestyle. This is especially true when it comes to skateboarders. Due to the fact that many of them roam the city streets and other areas searching for a place to ride others look at them in a negative way. They describe these skaters as dropouts and trouble makers. Many believe they are throwing away their life and that they have no respect for the law. Others look at them as being dirty and don’t want them in their neighborhood.

However, this is not normally the case. Most skateboarders are good, educated honest people that just enjoy having a lot of fun and socializing with others that enjoy the same things. They love the thrill of skating and take pride in what they do. They spend many hours practicing and learning new tricks and many skateboarders become extremely famous for their abilities as well.

The 1990s witnessed one of the most rapid rates of technological innovation in the 20th Century. A movement which spurred an increase in the availability of mass media and helped usher in an era where music was shaped by emerging technologies, transforming not only the songs of the 90s, but changing the world of music for the decades ahead.

At the epicenter of the new wave of technological innovations in the 90s was the digital revolution. Bulky, single-purpose mobile phones were replaced with smaller devices loaded with lots of embedded functionality. The internet grew exponentially from anonymity to become a digital communication and information super highway adopted by 50% of Western Countries. Helping to increase the dominance of the internet was Intel’s creation of the Pentium chip. For their part, computer hardware manufacturers added staples to their personal computer offerings such as CD burners and CD Rom drives.

With the onslaught of new technology came a transformation of the songs of the 90s. The 1990s heralded the dawn of the boy band, teen pop sensations, commercial and sampled hip-hop music tracks. Even armchair musicians would be given a chance to make more significant musical contributions with the glut in musical technology as it became possible for a wider number of musicians to produce electronic music. What started out sounding like dance music was gradually less targeted towards the dance-floor audience and more towards home listeners. This genre later became known as “Electronica”, or in its slower manifestations, “Chill-out” or “Ambient music”.

In late spring 1998, the first Mp3 player was released, alongside the 32 and 64MB Mp3 players. By the mid 2000’s the Mp3 format would overtake the CD player in popularity. Early adopters of the technology – mostly younger music audiences would be given the opportunity to endorse their preferred music tastes — the pop songs of the 90s, catapulting pop stars into the spot-light. Not surprisingly, between 1997 and 1999, American teen pop stars and groups were all the rage, with some of the more popular acts being the Backstreet Boys, NSYNC, 98 Degrees, Christina Aguilera and Britney Spears. This scene targeted the younger members of Generation Y.

Today, technology continues to play a vital role in deciding which music we allow into our personal space. The internet and new media have built on top of the foundations laid down in the 1990s bringing better access to talent that might have gone undiscovered in the past. Songs of the 90s evoke a sense of nostalgia of perhaps the decade in which the dominant music genres of today were still in their infancy.

There are some instances where travel agents can travel for free, but for the most part they do come out of their pocket. Below are three instances where travel agents can rack up extra savings and put money back into their pockets.

I will share my savings experience as a home-based agent, which has caused me to save hundreds of dollars!

Get Paid on Retail or Sale Pricing

When I travel as an insider, I get paid when I book travel for myself (and of course I get paid when I do it for others). The price I pay could be the same as any one that is not part of the industry, the difference would be I get a check and you don’t! Commissions are already built-into the price of what you see online or what your travel agent quote you already has the commissions built-in. (they are never in addition to price quoted, if you are told extra fees need to be added to cover commission… run)

Travel at Net or Wholesale Pricing

Now, if I decide that I want to travel at a lower cost and forgo my commission, I still have to pay the net cost, I just would not get paid for the trip. You can get travel at great bargains if you travel this way!

But, I must add that various agencies may have ‘special’ discounted trips that agents can take for themselves or sell to their clients and STILL get a commission! I love these because your getting paid AND the rates can be even better than net rate PLUS you have a great deal you can offer to your clients. Only downside is that there may be a limit on how many can travel and restricted to specific dates.

Travel on the Industries Dime

What about those really dirt cheap trips? Yes, dirt cheap destinations do exist and are exclusive for travel agents and are typically known as FAM trips or Familiarization trips. These trips are more educational for travel agents and teach agents about the property or destination experience they are visiting.

Vendors invite agents on these ‘FAM’ trips so they can get more in-depth knowledge to share with their clientele. The goal is to promote to get more bookings for those properties or destinations. Prices for these trips are such a steal that they might as well be free!

Just to recap, travel agents pay for their trips in four ways:

1. Travel at retail pricing & get paid the already built-in commission

2. Travel at retail minus already built-in pricing (therefore no commissions are paid)

3. Travel at wholesale plus get a commission (vary per agency and limits dates & quantity)

4. Travel on a FAM trip – steeply discounted trips (exclusive to travel agents

The KWP2000 protocol has become a de facto standard in automotive diagnostic applications. It is standardized as ISO 14230-3. KWP2000 describes the implementation of various diagnostic services you can accethrough the protocol. You can run KWP2000 on several transport layers such as K-line (serial) or CAN.

Transport Protocol

As KWP2000 uses messages of variable byte lengths, a transport protocol is necessary on layers with only a well defined (short) message length, such as CAN. The transport protocol splits a long KWP2000 message into pieces that can be transferred over the network and reassembles those pieces to recover the original message.

KWP2000 runs on CAN on various transport protocols such as ISO TP (ISO 15765-2), TP 1.6, TP 2. 0 (Volkswagen), and SAE J1939-21. For KWP2000, the Automotive Diagnostic Command Set supports only the ISO TP (standardized in ISO 15765-2) and manufacturer-specific VW TP 2.0 transport protocols.

Diagnostic Services

The diagnostic services available in KWP2000 are grouped in functional units and identified by a one-byte code (ServiceId). The standard does not define all codes; for some codes, the standard refers to other SAE or ISO standards, and some are reserved for manufacturer-specific extensions. The Automotive Diagnostic Command Set supports the following services:

• Diagnostic Management

• Data Transmission

• Stored Data Transmission (Diagnostic Trouble Codes)

• Input/Output Control

• Remote Activation of Routine

Upload/Download and Extended services are not part of the Automotive Diagnostic Command Set.

Diagnostic Service Format

Diagnostic services have a common message format. Each service defines a Request Message, Positive Response Message, and Negative Response Message. The Request Message has the ServiceId as first byte, plus additional service-defined parameters. The Positive Response Message has an echo of the ServiceId with bit 6 set as first byte, plus the service-defined response parameters.

The Negative Response Message is usually a three-byte message: it has the Negative Response ServiceId as first byte, an echo of the original ServiceId as second byte, and a ResponseCode as third byte. The only exception to this format is the negative response to an EscapeCode service; here, the third byte is an echo of the user-defined service code, and the fourth byte is the ResponseCode. The KWP2000 standard partly defines the ResponseCodes, but there is room left for manufacturer-specific extensions. For some of the ResponseCodes, KWP2000 defines an error handling procedure. Because both positive and negative responses have an echo of the requested service, you can always assign the responses to their corresponding request.

Connect/Disconnect

KWP2000 expects a diagnostic session to be started with StartDiagnosticSession and terminated with StopDiagnosticSession. However, StartDiagnosticSession has a DiagnosticMode parameter that determines the diagnostic session type. Depending on this type, the ECU may or may not support other diagnostic services, or operate in a restricted mode where not all ECU functions are available. The DiagnosticMode parameter values are manufacturer specific and not defined in the standard. For a diagnostic session to remain active, it must execute the TesterPresent service periodically if no other service is executed. If the TesterPresent service is missing for a certain period of time, the diagnostic session is terminated, and the ECU returns to normal operation mode.

GetSeed/Unlock

A GetSeed/Unlock mechanism may protect some diagnostic services. However, the applicable services are left to the manufacturer and not defined by the standard.You can execute the GetSeed/Unlock mechanism through the SecurityAccess service. This defines several levels of security, but the manufacturer assigns these levels to certain services.

Read/Write Memory

Use the Read/WriteMemoryByAddress services to upload/download data to certain memory addresses on an ECU. The address is a three-byte quantity in KWP2000 and a five-byte quantity (four-byte address and one-byte extension) in the calibration protocols. The Upload/Download functional unit services are highly manufacturer specific and not well defined in the standard, so they are not a good way to provide a general upload/download mechanism.

Measurements

Use the ReadDataByLocal/CommonIdentifier services to access ECU data in a way similar to a DAQ list. A Local/CommonIdentifier describes a list of ECU quantities that are then transferred from the ECU to the tester. The transfer can be either single value or periodic, with a slow, medium, or fast transfer rate. The transfer rates are manufacturer specific; you can use the SetDataRates service to set them, but this setting is manufacturer specific. The Automotive Diagnostic Command Set supports single-point measurements.

Diagnostic Trouble Codes

A major diagnostic feature is the readout of Diagnostic Trouble Codes (DTCs). KWP2000 defines several services that access DTCs based on their group or status.

Input/Output Control

KWP2000 defines services to modify internal or external ECU signals. One example is redirecting ECU sensor inputs to stimulated signals. The control parameters of these commands are manufacturer specific and not defined in the standard.

Remote Activation of a Routine

These services are similar to the ActionService and DiagService functions of CCP. You can invoke an ECU internal routine identified by a Local/CommonIdentifier or a memory address. Contrary to the CCP case, execution of this routine can be asynchronous; that is, there are separate Start, Stop, and RequestResult services. The control parameters of these commands are manufacturer specific and not defined in the standard.

External References

For more information about the KWP2000 Standard, refer to the ISO 14230-3 standard.

When it comes to the choice between using an online travel agency or not for your next trip, there are several factors to consider with several pros and cons.

One of the main concerns that seem to arise with online travel agencies is the trustworthiness and security of paying such large amounts of money online. While online security is a major factor for any online travel agency, this is true of all online businesses. So it is more a matter of choosing a travel agency online with a quality reputation by looking at their customer reviews and see what their actual site itself is like. What’s more, when you are logging on and preparing to pay for any online costs, there should always be that small symbol of a lock at the bottom right hand side of the screen as a sign of the level of security attached.

The benefits of using online travel agencies are that unlike their physical counterparts, they are available at any time, ideal for emergency travel situations, and also for any late after-hours bookings that you need to complete. Additionally you can compare travel deals and special available all over the world in order to find the very best deal for you and your travels. What this means is that while a physical travel agency will have a great range of deals for you, they are limited by who they can work with in terms of other travel professionals. With these online agencies, it up to you to decide who you work with, allowing you to create your ideal travel plans.

What you may also find when working with online travel agencies that you will have a great range of methods to pay for the holiday, offering greater flexibility and financial choice. These choices can range from the standard credit cards and accounts to payment plans and travel accounts.

Overall when talking online travel agencies it is more a matter of preference of the customer and how they prefer to do their business, either online or in person, that should dictate how they book their travel plans.